Dry & heat-free
No water to dry out of your goods, no heat to distort them. Material properties stay exactly as the manufacturer intended, edge to edge.
Ultrasonic Cutting Services · Centralia, Washington
Your logo,
cut into the floor.
We ultrasonically cut custom logos, inlays, and shapes in resilient flooring — LVT, VCT, linoleum, and rubber. Send us your drawings or graphics; we cut, label, and kit the pieces so they drop in flush on site.
From a real cut file
Four sheets. Four cuts. Four unique fish.
A real medallion from our shop — twelve pieces, four materials, the same file cut four times. The pieces rotate so no piece ever touches its own color, and every piece gets used. Four finished floors, no two alike.
Off the bed & out in the wild
see all work →The drywall-knife rule
Can we cut it?
Our honest rule of thumb: if you can cut it with a drywall knife, we can cut it beautifully. Tap your material below for a straight answer.
Pick a material above — we’ll tell you straight.
Material not listed, or something unusual? Email us what you’ve got — if we can’t cut it, we’ll say so and point you toward who can.
The technology
A dry cut, held to ±0.005″
Ultrasonic cutting uses high-frequency vibration for near-frictionless slicing — no heat, no water, no pressure. Most decorative floor cutting is done wet; ours never touches your material with anything but the blade.
Flush edges, no finishing
Near-frictionless slicing prevents fraying and distortion. Insets drop into their recesses flush — no gap-filling, no touch-up.
Identical, forever
Your design lives as a digital file. A 40-store rollout cut over two years matches piece for piece — the last logo identical to the first.
Nested for minimal waste
We toolpath and nest your parts to get the most out of your goods — it’s usually your material, so the savings are yours too.
The working envelope, to scale
Single pieces up to 78″ wide and as long as you need. On roll goods, locator practices let us run a continuous cut well past the 392″ bed with no seams down the run. Wider than 78″? Still doable — split into parts, so expect a seam across the width.
What we cut
Flooring first. Flat goods, brilliantly.
Logos & branding inlays
School mascots, hospital emblems, company marks — cut as true inlays: the inset piece and its matching recess in the field material, both from your artwork.
Floor designs & medallions
Borders, motifs, feature strips, medallions, and wayfinding cut-ins in resilient materials — for the patterns designers spec and installers have to make real.
Pre-cut installation kits
Everything arrives nested, labeled, and pre-assembled where it helps — with directional taping and layout references so your install crew places it accurately the first time.
Beyond flooring: composite kits
We also cut carbon fiber pre-preg and fiberglass cloth into labeled kits for vehicles, machines, and engineering applications. Same precision, same file-driven repeatability.
Partial-depth cutting
Half of the way through your material’s thickness — or a third, or a quarter. A niche capability, there when your application needs it.
JPEG in, cut floor out
Vector files (SVG, DXF, DWG, PDF) cut fastest. Only have an image of your logo? We trace it into clean cutting paths and confirm the artwork with you before anything gets cut.
For flooring contractors
You bid it. We make the hard part easy.
- Your material, your warranty. In about 90% of jobs you ship us your goods — spec and warranty stay under your control.
- Fabrication only. We never touch installation, so we’re never competing for your contract.
- Kitted for the crew. Nested, labeled, directionally taped, pre-assembled where it helps — placement, not puzzling, on site.
- Quotable from a sketch. Send what the client gave you — concept art, a photo of a drawing, a vector file — and we’ll price it.
Materials
We specialize in resilient flooring
LVT
Luxury vinyl tile & plank — clean cuts through wear layers without chipping or delamination.
VCT
Vinyl composition tile — the institutional workhorse, cut crisp for logos and wayfinding.
Linoleum
Sheet and tile linoleum — dry, heat-free cutting preserves the material through the full depth.
Rubber
Rubber flooring and sheet goods, from sports surfaces to industrial silicone.
Want proof you can hold?
We cut sample coasters from real flooring material so you can feel the edge quality yourself. Stock-pattern coasters come in small sets (about 3–5 pieces). Shipping is covered by you, and custom artwork is quoted separately.
Sample pricing & availability are being finalized — email us for current options. Already a customer? Ask about coaster runs of your own logo, priced by quantity.
Real work
Cut here. Installed everywhere.
Every photo below is our fabrication — cut on the bed in Centralia, installed by flooring contractors around the country.
For the building
installed entry — curves cut, not coved
For the school
gym-scale marks, cut from one file
For the patients
healthcare floors that lower the temperature
FAQ
Straight answers
What file formats can you work with?
JPEG, PNG, PDF, DXF, DWG, and SVG. Vector source files cut fastest; if you only have an image, we trace it into cutting paths and confirm the artwork with you first.
Do you provide the flooring material?
In about 90% of jobs we provide cutting services only — you ship us your material. This keeps your material under your spec and warranty. We can discuss sourcing for special cases.
Do you install?
No — we fabricate, your installer installs. We pre-cut, label, and package everything so your flooring contractor or facilities team can place it accurately.
How long does production take?
Once your project details are agreed and sufficient materials have arrived on-site, plan on about 7–10 business days for us to complete your order. Shipping costs and times vary.
How precise are the cuts?
Our CNC-controlled ultrasonic system holds a working tolerance of ±0.005″. In practice: inlays drop in flush, with clean edges and no gaps.
What areas do you serve?
We’re in Centralia, Washington and ship nationwide. Most of our work comes through word-of-mouth referrals from flooring contractors and designers across the country.
Can I see a sample of your work?
Yes — we cut sample coasters from real flooring material so you can inspect the edge quality in person. Stock-pattern sets (about 3–5 pieces) are available; shipping is covered by you. Email us about sample options.
Is there a minimum order size?
Minimums vary by material and complexity. Contact us with your project details and we’ll let you know quickly — small jobs are often very doable.
Can you handle rush orders?
Our schedule is built around planned timelines — standard production runs 7–10 business days after approval and material arrival. If you’re up against a hard deadline, reach out and we’ll tell you honestly what’s possible.
Get started
Get your custom quote
Email us your drawings or graphics for a professional quote — we’ll come back with pricing and a timeline.